Thank you!for purchasing our PowerBRIDGE6C
ThePowerBRIDGE from Clef Audio is the perfect solution for those who require a cost effective way to remove mains noise and distribute power efficiency. Although affordable but our core values have not been compromised, each unit features surge protection and our proprietary POLARIS IV FILTER,VEGA FILTER ll and ZX-FILTER technology, reducing products interfering to each other via the main supply. The unit is simple to install, LED indicators illuminate when Phase, Ground of your AC line input are OK and when the PowerBRIDGE is powered. A dedicated Ground post allows for the grounding of other sensitive electronics within the system. For those who seek increased performance or would later upgraded, the PowerBRIDGE design is flexible to use
1. Polaris lV Technology, this is Clef proprietary filter technology which is different from common filter design. The common filter design usually filters only high and very high frequency. Polaris filter in PowerBRIDGE is designed to work from 10KHz upward which is the frequency band that affects the sound and video quality. Polaris filter can reduce the noise in AC line over 95% of total noise so the improvement of sound and picture quality can be clearly detected. For video filter output,new Vega filter ll is used for reduce high frequency noise in video band.
2.ZX(ZERO-Cross) Technology, each duplex has the special filter circuit to reduce the interference generated by equipment plugged into duplexes from one duplex to the other duplex. This to ensure the purity and cleanness of the AC line deliver to equipment.
3.Star Wiring Technic, this is special technique which totally separate the wiring to each duplex. This will reduce the crosstalk between duplex and increase maximun current delivered the equipment. The PowerBRIDGE can deliver full power to hight power equipment e.g.power amplifier, receiver and powered sub-woofer without the limit in current capacity as found in common power distributor design.
Current rating: 20 amps
Operating Voltage: 190 to 250 VAC
Spike Protection Modes: L-N, N-G, L-G, zero ground leakage
Spike Clamping Voltage: 710 Vpk @ 200 amps
Response time: 1 nanosecond
Maximum surge current: 39,000 amps (8 x 20 mS pulse)
Maximum spike energy: 1,140 Joules total
Noise attenuation: >10 dB @ 10 kHz
>46 dB @ 100 kHz
>100 dB @ 1-10 MHZ